Manufacturers of Oil Chiller in Kannur

The oil chiller is a unit which performs cooling of the hydraulic oil, lubricating oil and cooling oil of machine tools. In various parts of the machine tool spindles the bearings and gears get overheated and thermal deformation occurs due to the high speed rotational impact. Then the displacement of the shaft affects the machining accuracy. Also, as a result of the temperature rising of the hydraulic oil of the actuator, impact on the machining accuracy resulting from oil degradation due to changes in speed is also a reason for concern. Our Oil Chiller performs cooling down by circulating oil and thus prevents oil temperature rise. The environmental resistance is also significantly improved compared with conventional units. Even at times when a lot of oil mist gets scattered, this product demonstrates the capability of being “dirt resistant” and “able to retain its functionalities even when getting dirty”.

Design Features

-Oil temperature range 5ºC to 35ºC.  
-Danfoss/Copeland scroll compressor.
-Shell and tube evaporator.
-Microcomputer control system offering accurate temperature stability within ±1ºC.
-Low noise axial fan motor, quietly running.
-Large flow volume centrifugal pump, higher pressure available on request.
-Multi-protection devices to make sure the chiller and the equipment running safety.
-Schneider electrical components.
-Danfoss/Emerson thermal components.


Unit Safety Protection

-Compressor inner protection
-Over current protection
-High/low pressure protection
-Over temperature protection 
-Flow switch
-Phase sequence/phase missing protection
-Low coolant level protection
-Anti freezing protection 
-Exhaust overheat protection