Gaining the vast experience and backed with the assistance of skilled team, we are proudly presenting Regular Type Cooling Tower. These are precisely manufactured using high grade raw materials using cutting edge technologies and machineries. Thus, known for removing waste heat from the atmosphere, it immensely meets the international quality standards. Our quality controllers stringently examined each product before delivery. For the convenience of our customers, these are available in different technical specifications.
Square Type Cooling Tower
The square Cooling Tower is of the design: vertical induced draft counter flow, with a uniform distribution of water and an optimal transfer of heat .These are utilized by all large industries in order to cool the water that has undergone recycling. The installation of Cooling Tower can be done independent of the direction of wind. Cooling Towers are nothing but heat rejection devices that are used to remove unwanted heat into the air from the cooling stream of water to a reduced temperature
FRP Cooling Tower
The frp cooling towers india is designed with fiberglass reinforced plastic and highly resistant to corrosion. The fiberglass reinforced plastic is a blended material. The fibers used in the blend are carbon or aramid, glass, wood, paper and more.
The important facts of frp cooling tower are as follows,
- The pultruded FRP is designed using pultrusion technology and this has become the most
general and preferable constructional material for small cooling towers.
- While comparing to the reinforced concrete, FRP demands only less maintenance and offers low costs. However, we can still encounter the use of reinforced concrete in large constructions.
- The FRP cooling tower remains a best fit to construction industries, aerospace, marine industriesand automotive industries.
- You can find different types of frp cooling towers to choose from, which includes frp round cooling tower, draft cooling tower, frp square cooling tower and more. All you ought to do is to choose the best one for you.
Working Principle of Square Type Cooling Tower
All the cooling towers are working on the principle of water evaporation. On evaporation of water, both heat and mass transfer takes place, and water gets cooled. Rate of evaporation is increased by increasing air velocity. In case of cooling tower we call this an air draft. This air draft is created by mechanical system of power driven fan. We create the same air draft in our cooling tower, by using specially designed spray nozzles.
Evaporation is a natural phenomenon. Water will evaporate till air in contact with it gets saturated with moisture. Evaporation cannot be more than the saturation point of air. Thus total evaporation will depend upon the moisture holding capacity of air, which depends on humidity.
When hot water is sprayed from top of the cooling tower through our nozzles, it gives jet effect and air is sucked from the area surrounding each nozzle. Air and water travel in co current direction down to the basin. During this travel, air cools down the water to desired temperature, and escape through FRP louvers.
Thus our cooling tower does the same performance as done by the Fan Operated Cooling Tower, without the use of fan.
With the above characteristics our cooling tower has dual benefits, one there is no power requirement and second there is no break down / no maintenance. Another important advantage is that, because there is no fan, there is no scope for electrical spark or friction spark. It can be installed safely in the, inflammable area.+
Features Cooling Tower Maintenance
- The flow of water ranges between 5 M3/Hr To 11000 M3/Hr
- The design easily blends with the architectural environs
- The casing of the same is of tough Fibre Glass Reinforced Plastic (FRP).It posseses sufficient structural power to endure winds of high velocities as well as vibrations. Besides Gel coat, an ultra violet stabilized resin is also used for extended life. The square Cooling Tower is resistant against local impacts and local repairs could be easily done in case of occurrence of slight damages
- A temperature difference from 4째C To30 째C can be ensured
- It uses less energy on the whole due to minimal resistance of air to water
- Nozzles are designed easy cleaning while running the square shape Cooling Towers
Applications Of Square Cooling Tower
- In cold rooms and air condition plants
- Aluminum Die casting
- Dairy industry
- Chemical industries
- In food industries such as hotels as well as in industries of Food Processing
- Oil refineries
- Automobile industries
- Forging and Mechanical industries
- Plants manufacturing glass
- Also employed for mega watt project industries’ heat process
- By plastic moulding machineries