Frp box shape cooling towers

Introduction

FRP Cooling towers are withstand corrosion, resist water borne bacteria’s and organisms and it is light in weight, vertical induced draft counter flow design permits installation in any direction with freedom being round the air flow through the tower is more evenly distributed. Cooling tower casing is made of selected grade materials of Fibber Glass Reinforced Plastic & resins. Additional embossing is done for extra strength. FRP casings and basins are designed withstand severe vibration, high wind load and to resist corrosion. Honeycomb PVC fills are used for extended contact area having high heat transfer efficiency. The crossing of air & water streams in close proximate, which creates a diffused turbulence conductive to evaporation & efficient heat transfer.
FRP Cooling Towers to our respected patrons. Offered range of products are manufactured in compliance with the industry laid parameters that ensure their flawless nature and efficiency. Moreover, patrons can avail from us a wide range of these pieces in various sizes, grades and other detailed specifications. In addition to this, our quality controllers thoroughly check the range for any flaws or defects. These products are greatly admired for its performance and excellent construction.

Image of FRP Cooling Towers:

http://frp cooling towers

Material Used For FRP Cooling Towers:

CASING/BASIN :
These towers are made of tough fibber glass with reinforced plastic (FRP) and comprises adequate structural strength to withstand high vibrations and wind vibrations. Gel coat is used for UV rays protection and longer life, The FRP water basins are leak proof.
FILL :
The poly vinyl chloride (PVC) fill is rigid and comprises the honey combed design with very large contact surface area. Its purpose is to split the water and air into different streams so as to increase the time of contact and also heat transfer between both the elements. These fills are available with us in standard size of 24”x 12” x 6” with the thickness of 0.25 mm.
MOTORS :
Especially designed for water cooling towers, these motors are enclosed having IP-55 protection. Flange mounted extended shaft motors are weather proof.
DRIFT ELIMINATOR:
Made using rigid PVC material. The FRP flappers attached to the sprinkler reduces the drift loss of water.
SPRINKLER :
Our sprinklers are available in Brass/ SS/ aluminium/ PVC and the sprinkler pipe that spreads the hot water over the entire space of the fill area. These sprinkler pipes require low pressure to operate and assure uniform & non- clogging water flow.

Features Of FRP Cooling Towers:

  1. Smooth edges.
  2. Deliver cooling efficiency
  3. Galvanized hardware
  4. Robust construction
  5. Low maintenance6.
  6. Compact and light weight
  7. Corrosion & weather resistant
  8. Induced draft counter flow designs
  9. Direct driven axial fans
  10. Uniform stationery type water distribution system
  11. Honey comb type PVC fills with large surface area with negligible resistance to air flow
  12. Maintenance down time is very low due to inspection window
  13. Trouble Free Operation
  14. Easy Installation.

Applications OF FRP Cooling Towers:

1.Air Conditioning and Refrigeration
2.Induction Furnaces
3.Process Cooling
4.Plastic Moulding MachineScrew/Air Compressors

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,