MANUFACTURERS OF FRP INDUCED DRAFT COUNTER FLOW COOLING TOWERS IN KASARAGOD

FRP COOLING TOWERS

FRP Induced Draft Counter Flow Cooling Towers: The tower casing is manufactured from fiberglass reinforced plastic (FRP) so it is called FRP Cooling Tower which is highly corrosion resistant and gives sufficient structural strength, to withstand high wind velocity and vibration.

  • FRP BOTTLE SHAPE COOLING TOWER
  • FRP SQUARE SHAPE COOLING TOWER

Energy Saver Induced Draft Counter Flow FRP Cooling Towers

This tower design has been developed after detailed research and analysis of the engineering design. The design allows a substantial saving in space, power and water consumption.

Our State-of-Art technology is best suited to the industrial requirements as per Indian environmental condition.

High Performance Design

  • Latest superior computer designed PVC FILLS offer maximum surface area with minimum resistatnce to Air Flow and hence lower power consumption which means lower annual electrical bills.
  • The high efficiency of the fans is achieved by a tapered and aerodynamic design of the fan blades. This dynamically balanced fan assembly ensures smoother operation, longer bearing & motor life.
  • Superior quality of FRP laminates with isothelic resin increases strength of the casing shell which reduces vibrations and it gives assurance of longer tower Life.
  • Neo Penta Glycol (NPG) gelcoat finish assures for UV protection and colour retention with superior surface finish and hence superior asthetic look.

SALIENT FEATURES

Casing / Shell

Round bottle shape designed casing can withstand high wind velocity, sudden shocks and vibrations than square type Cooling Towers. Round Shape has more strength than square shape for the same FRP thickness.

Round shape allows uniform air distribution which optimises the heat dissipation. Square shape do not allow uniform distribution which creates hot pockets of low heat dissipation.

We take enough care for perfect sealing of the segments of the round tower by continuous type sealent during erection, so as to give same effect of one piece FRP molded casing for better performance of the tower.

PVC FILLS

Honeycomb and ring type PVC fills are continuously vacuum formed and specially treated to provide the maximum contact area for heat exchange. The crossing air and water streams in close proximity, creates a diffused turbulence conductive to evaporation and efficient heat transfer.

SPRINKLER

We specially designed for uniform distribution of water over the honeycomb PVC fill. There is no motor, but with the jet recoil force to rotate and distribute the water. This is made of Aluminum Alloys to avoid corrosion. It consists of PVC pipes, on which a series of apertures are drilled longitudinally fitted on a light weight, PVC rotary head and mounted on sealed ball- bearings.

FAN ASSEMBLY

Made of aluminum alloy, these blades are energy efficient. In conjunction with other features Welltech towers economize significantly on power consumption.
Made of FRP, these blades are energy efficient which are dynamically balanced with light weightaluminium alloys Hub. In conjunction with other features Our towers economize significantly on power consumption.

DRIFT ELIMINATOR

To reduce carry over losses through entertainment of moisture drop in air strain. Welltech Cooling Tower Pvt. Ltd. employ a unique honeycomb channel structure to effectively remove moisture from the rising air stream at the crucial moment.

HEADER & BRANCH PIPE

We specially designed for uniform distribution of water over the honeycomb PVC fill. The water distributes from header pipe to sub branches. These sub branches splash the water on Honeycomb PVC fills through PVC nozzles consists of PVC pipes, on which a series of apertures are drilled longitudinally fitted on a light weight, Double header inlet of PVC pipes will be used for uniform water distribution which gives better cooling.

SUPPORTS & HARWARE

All components like tower supports, motor supports, leg supports etc. are either hot dip galvanized or epoxy coated. Hardware is galvanized steel. Stainless Steel or phosphor Bronze hardware can be supplied on request at extra cost

EXCELLENT FRP QUALITY

Superior quality of FRP laminates with isothelic resin increases the strength of the casing which reduces the vibrations and it gives assurance of longer tower life.

Neo Pental Glycol (NPG) gelcoat finish assures for UV protection and colour retention with superior surface finish and hence superior asthetic and elegant look.