WELLTECH Industrial Chiller is created to allow the user to build a custom tailor chiller. The chiller is applied with air-cooled / water-cooled condensers designated to suit both industrial and commercial application.
The chiller is compact and required the minimum of floor space for installation.
Chiller with a condensing unit, heat exchanger, water pump, tank and all the electrical and refrigeration components are housed in one box panel as an integral part for easy control and maintenance.
Chiller is available in several capacities over a wide operation range.
VARIABLE SPEED DRIVE
The machines are installed with Frequency Convertors which will reduce the machine speed at low load conditions which eventually results in HUGE SAVINGS in Power Consumption.
The Economisers installed in the Refrigerant Circuit , Subcools the liquid Refrigerant , and eliminates all flash gas . This ensures a more effective use of the latent heat of evaporation present in the liquid refrigerant.
AIR OR WATER COOLED
The Refrigerant Condenser can be either Air-cooled , Evaporative or Stainless Steel Plate Type depending on customer preference and site conditions.Also available Sea Water Resistant Condensors and/or Tube in Shell Type
MOST RELIABLE COMPRESSORS
The machines are fitted with top brands of Compressors Typically , our larger systems are installed with Semi Hermetic Screw Compressors and smaller with Reciprocating compressors. A lot of thought goes into the design of these machines to make them Environment friendly. Some of the environment friendly features are Reduction of power when the load is lower , Environment friendly components … and more.
World famous brand screw type compressor equipped with the high-efficiency-copper tube condenser and evaporator, together with famous brand control components so as to ensure the small size, low noise, small vibration, large energy, long service life and convenient operation. Elegant design, excellent reliability and high-quality performance make it outstanding in the refrigeration field.
Features of the compressor：
1.World famous brand new type and high-efficient screw-rotor compressor, with efficiency 20%~30% higher than those common ones. It has obtained several patents of Europe and America countries and passed the international quality certification of ISO9001.
2.High efficiency 5-to-6 rotor profile patent.
3.Capacity control apply to four-step (100%-75%-50%-25%),three-step (100%-66%-33%) and no step control system.
4.With 11 bearings and a balance piston against axial thrust. This extends longer bearings life 2.5 to 3.5 times than traditional design.
5.Designed with efficient silicon steel and special slots , and equipped with the inside and outside all around design to cool the flow channel so to ensure maximum efficiency of the compressor motor under any load.
6.Built-in oil pressing system ensure compressor maintaining the optimal lubricity without oil pump.
7.High efficiency double filtration oil separator ensures maxinum heat exchanger.
8.Efficient, low noise and small vibration.
9.Various options of refrigerants, R22, environment-friendly R134A, R407C etc.
10.All-wave compressor volume ratio(Vi=2.2/2.6/3.0/3.5) for selection to avoid the extra energy consumption caused by over or under compression
TECHNICAL SPECIFICATIONS : 10 TR WATER CHILLER
|Water Flow Rate||1000 LPH|
|Equipment Type||Air Cooled Soda Chiller|
|Ambient Temp.||45 degree Celsius(Maximum)|
|Inlet water pressure||2-3 bar|
|Max. Relative Humidity||100%|
|No of Compressor||1 No|
|Power supply 3 phase 50 HZ AC||415 V|
|Control Supply AC Single phase||230 V|
|Ref Comp Power||15.2 KW|
|Temperature Range||(-40)ºC to +25ºC|
|Thermal Difference ( max)||23 ºC|
|Temperature inlet/outlet||28 / 5 ºC|
|Noise Level||Less than 80 db at 1 meter Distance|
|Tank Capacity||Your Scope|
|Head Load [kcal/hr]||30000|