MANUFACTURE OF PVC DRIFT ELIMINATOR IN JAPAN

The Drift eliminator is a honeycomb cellular profile with low pressure drop which is manufactured exclusively by Flow-Tech AIr Pvt. Ltd. The FTA 100HS have high efficiency with minimum resistance to air flow of fans.

DRIFT ELIMINATOR form an S shaped tubular structure. Individual S shaped corrugated sheets are bonded with subsequent layers to form the honeycomb like structure with single bank double pairs.

The DRIFT ELIMINATOR is a nesting cellular PVC type design drift eliminator. FTA100 HS is an advanced design that meets the demanding specifications for drift emissions today without compromising on fan HP.

Low drift rate is paramount in terms of an eliminator design and the DRIFT ELIMINATOR produces typical drift rates of 0.02% of the total USGPM. Lower drift rates are also available depending upon tower specifications and additional client requirements.

DRIFT ELIMINATOR require negligible or zero maintenance. If in a situation it becomes necessary to clean them, one must take care so as to not physically damage the PVC eliminator packs.

SALIENT FEATURE

– Material spec. : 600 x 600 x 100 (mm)
– Sheet thickness : 0.3 to 0.4 (mm)
– Material : uPVC Maximum
– Operating temp. : 55 degrees C
– Profile distance : 25