Manufacturers of Cooling Tower Spray Nozzle in Coimbatore

What is Cooling Tower Spray Nozzle

Cooling tower nozzle is an important accessory of the cooling tower. It is widely used in cross flow cooling tower and counter flow cooling tower.

They are fixed by ABS pipe or FRP pipe in the middle of the tower and connected with the water pipe.

When the water flow by a certain press to the nozzles, keeping the hot water rotating into the nozzles and then flow away from the nozzle bottom. To make every cooling tower spray nozzle has inlet and outlet.

The inlet connected with water pipe, and the outlet has special design in order to make the water spraying uniform and continuous. And then make the water drop down the cooling tower fills.

About Welltech

WELLTECH is dedicatedly involved in offering a wide range of Cooling Tower Spray Nozzle to our precious customers. This is manufactured using supreme grade materials and ultra modern techniques in adherence with industry norms. The offered nozzle has strong compatibility with a range of chemicals, oils, and heat, making it one of the most common and widely used sealing materials. This is widely used in chemical, automotive, aerospace and industrial applications. Before delivering at client’s end, this Cooling Tower Spray Nozzle is tested on certain parameters by the deft quality inspectors.

Our range of spray nozzles are fabricated using brass, nylon, pp, pvc and stainless steel 304. Hollow cone jet sprays are one of the commonly offered spray nozzles types that are designed with a replaceable orifice cap and are of non-clogging types.

Importance of SPRAY NOZZLE

Cooling Tower, a heat exchanging equipment. Receives hot water from Surface condenser, which needs to be cooled & recycled back to the condenser for the continuous cycle. In a Power Plant or any steam producing stations, production efficiency depends on the condensation of steam & recycling. The surface condenser plays an important part in this cycle. Effectiveness of condenser depends on the temperature of the cooling water.

Cooling Water can be effectively cooled only if it is properly distributed in to the fine particles for it get cooled to the required temperature. The Spray Nozzle, the cheapest in Value of the cooling tower parts, but plays a critical role in deciding the efficiency & size of the cooling tower.

WELLTECH is not just a Nozzle manufacturer, we also simulate the performance of the cooling tower Nozzles in our works with our Nozzle flow testing facility to analyse every contours in the design of the Nozzle. We have successfully supported many of our OEM- cooling tower manufacturing customers in reducing the size of the cooling tower thereby reducing the cost of the cooling tower by efficiently utilizing every space available beneath the Nozzle for cooling application. The space to be provided between each Nozzle & wet surface area available over the packing fill depends on the Nozzle.

WELLTECH Manufactures Nozzles different shapes & in different orifice sizes for achieving flow characteristics. Every Nozzle has different levels of spread zones to split the water in to the droplets as possible. Sizes of the droplets are also very important as too small droplets may get carried away by the cooling air & heavier film formation may act as a hindrance to the flow path of the cooling air. Within these two extremes, Nozzles are designed by the designer & supplied according to the client needs.

Different Type of Spray Nozzles

  • HDPE TARGET NOZZELS (BLACK) SIZE 1/2″ 19MM AND 3/4″
  • HDPE WHITE SPRAY NOZZELS MALE & FEMALE THREAD SIZE 1/4″ 3/8″ 1/2″ 3/4″ & 1″
  • PP AMPULLAR TYPE NOZZELS SIZE 1.5″ & 2.5″
  • PP GREY NOZZELS FEMALE THREAD SIZE 1/2″ 3/4″ & 1″
  • PP UMBRELLA TYPE NOZZELS
  • PP STEEL CATORI NOZZELS
  • PCS MILKY NOZZELS
  • PP/NYLON BOLT NUTS
  • MS PP COATED BOLT NUTS AND STUDS
  • PP GRIDS

Advantages of Spray Nozzle

  • Used for Humidification, Air Automisation, Paper Cutting, etc.
  • Manufactured out of various types and grades of metals
  • Range with various orifices, thread fittings, spray and spread
  • Manufactured to customized requirements
  • Robust construction
  • Elevated durability
  • Easy to install

Technical Specifications

Minimum Order Quantity100 Number
BrandWELLTECH
Modelstandard
Thread Size1/2″ TO 1″
Orifice Diameter15MM TO 25MM
Pressure1-3 bar
ConditionNew
Material GradePP
Size (Inch)1/2″ TO 1”
ApplicationCooling Tower
MaterialPVC
ColorNatural