Evaporative Coil Type Heat Exchangers

An evaporator is a device used to turn the liquid form of a chemical into its gaseous form. The liquid is evaporated, or vaporized, into a gas.Our range of includes copper evaporator coil/evaporator coil/cooling coils /Freezer Finned copper Evaproator Coil Heat Exchangers Made of copper pipe & aluminium fins widely used in freezer,cold room,condensing units,Freezer Finned copper evaporator Coil.An Evaporative Coil Heat Exchangers is the part of an air conditioner or heat pump that absorbs the heat from the air in your house. It is located inside the air handler or attached to the furnace.The evaporator and condenser coils inside a central air conditioner or heat pump make it possible for these systems to complete the heat exchange process, which is the basis of refrigerated cooling and, in the case of heat pumps, heating. The coils form a loop and, even though they’re continuous, each has a different function.

Evaporative Coil Type Heat Exchangers
Evaporative Coil Type Heat Exchangers


  • In Evaporative Coil Heat Exchangers Copper tubes are important because motors and motor-driven systems account for 43%-46% of all global electricity consumption and 69% of all electricity used by industry.

  • Increasing the mass and cross section of copper in a coil increases the electrical energy efficiency of the motor.

  • Copper motor rotors, a new technology designed for motor applications where energy savings are prime design objectives, are enabling general-purpose induction motors to meet and exceed National Electrical Manufacturers Association (NEMA) premium efficiency standards.


  • The major applications of copper are in electrical wires (60%), roofing and plumbing (20%) and industrial machinery (15%).

  • Copper is mostly used as a metal, but when a higher hardness is required it is combined with other elements to make an alloy (5% of total use) such as brass and bronze.

  • A small part of copper supply is used in production of compounds for nutritional supplements and fungicides in agriculture.

  • Machining of copper is possible, although it is usually necessary to use an alloy for intricate parts to get good machinability characteristics.