Fanless Cooling Tower Manufactures

[vc_row][vc_column][vc_column_text]Natural Type Cooling Towers are nothing but the water is cooled with natural atmospheric air travelling and the water is sprayed with the help of Spray nozzles and covered with louver covers. This method saves the operating cost because it has no mechanical fans. These cooling towers are called as atmospheric cooling tower or Fanless and fillless cooling tower.

Splash loss and dust prevention capacity: Five-fold water blocker installed at the air vents of the tower top for liquid-water separation. In addition to dust prevention, the water splash loss is between 0.001~0.009% (as per spray pressure). Reduce more than 90% water splash loss than the traditional tower and reduce the transmission of Legionella bacteria.[/vc_column_text][vc_empty_space alter_height=”medium” hide_on_mobile=””][/vc_column][/vc_row][vc_row][vc_column][vc_row_inner][vc_column_inner width=”1/2″][vc_single_image image=”1713″ img_size=”medium” alignment=”center”][/vc_column_inner][vc_column_inner width=”1/2″][vc_column_text]

Fan-less cooling towers seen nowadays are the large hyperbolically shaped installations used in large power or chemical plants. They operate via the natural draft principle. Surely there is no electromotor to drive the fan so from that point of view they are more energy-efficient. It needs to be considered thought hat the water needs to be brought up much higher then an a forced draft cooling tower, which compensates most of that energy advantage. It is therefor a myth that fan-less cooling towers consume far less energy than the conventional cooling towers. The energy consumed by a mechanical draft cooling tower is only slightly higher than a natural drift fan-less cooling tower.The cooling capacity of a fanless cooling tower depends on the intensity of the contact and mass ration between air and water.

[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_empty_space alter_height=”medium” hide_on_mobile=””][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]

  • Parallel flow-induced draft technology is used in the cooling tower.

  • Structural component: mild steel hot dipped galvanized
  • Saves electricity and no maintenance required
  • Fiber glass reinforce plastics is the construction material of this cooling tower.

  • Water distributed by fixed rotojet nozzles
  • The capacity is 9 mĀ³/hour and it can be customized as per the requirements of the customers.

  • Factory fabricated and designed to be assembled at the job site

  • This cooling tower can be used in plastic processing plant, light to medium industrial, chemical plant, steel rolling mills, process cooling, pharmaceutical plant, and more.

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]

  • Reliable functioning
  • Precisely engineered
  • Smooth operation
  • Easy to install
  • Affordable
  • Highly durable
  • Minimum maintenance cost
  • Compact design


  • Capacity: 10 tr to 1200 tr
  • Air receiver: 50 ltrs to 20000 ltrs
  • Heat Exchanger: 50 lmp to 5000 lmp