FRP Square Shape Cooling Tower

[vc_row][vc_column][vc_column_text]

These cooling towers can be made available in any capacity and of any size. Square type cooling tower is widely used in different industrial processes of cooling from high quality raw materials such as steel sheets, alloys, aluminum sheets, brass, and nickel. FRP square shape cooling tower is highly demanded in diesel engines, machines, process coolers, air-conditioning plants, etc. This light in weight tower is designed to provide maximum performance with reduced noise and maintenance. Its ergonomic design with unmatched mechanism for water distributing section is ideal to provide high efficacy. In addition, its high rate of cooling without any development of moist formation ensures to provide maximum durability. Less drift loss of water, leak proof design and water spillage resistance are some of the features that make it highly popular in the market.

[/vc_column_text][vc_empty_space alter_height=”medium” hide_on_mobile=””][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]

The series adopts the fundamentals of induced draft counter flow operation, whereby the heated water enters the cooling tower via the inlet pipes and leaves out after lowering down the temperature. The hot water is splashed through the non clogging splash caps over the fills/packing for increasing the surface area. Simultaneously the outside dry air is induced to the cooling tower with the efforts of cooling tower motor emplaced on the top. Due to this counter contact of water and air, the evaporation takes place resulting in the temperature drop.The air inlets are limited to the lower part of the casing walls and the air after going through the functioning area leaves most of the entrained moisture in the new and the effective system of drift eliminators.

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_single_image image=”1675″ img_size=”large” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text]

Features

  • All structural in HDG Steel
  • PVC Fills with varying flute sizes of 12 mm,14 mm,19 mm,22 mm
  • TEFC, IP-55 Protected ‘F’ Class Insulated motor with extended shaft
  • Adjustable pitch axial flow, dynamically balanced aluminium fans
  • Casings of FRP (Fibre Reinforced Plastics) for durability and strength
  • Uniformity in water dispersion through non – clog nozzles
  • Capacities 10TR to 1500TR , in single cell
  • Water flow 5 m3/h to 1000 m3/h, in single cell
  • Delta T (Temperature drop) 4°C to 20°C, in single cell

[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]

Applications

  • In cold rooms and air condition plants
  • Aluminum Die casting
  • Dairy industry
  • Chemical industries
  • In food industries such as hotels as well as in industries of Food Processing
  • Oil refineries
  • Automobile industries
  • Forging and Mechanical industries
  • Plants manufacturing glass
  • Also employed for mega watt project industries’ heat process
  • By plastic moulding machineries

[/vc_column_text][/vc_column][/vc_row]